glasswashers- SPECIFICATIONS -
|
SPECIFICATIONS |
SL19 | |
MEAL SERVICE |
Glasswasher | |
RACK DIMENSIONS |
350 X 350 mm | |
MAXIMUM PLATE HEIGHT |
220 mm | |
NO of Racks |
2 | |
FIXED CYCLE |
120 sec | |
MAXIMUM GLASS HEIGHT |
220 mm | |
DRAIN PUMP |
NO | |
COLD RINSE CYCLE |
YES | |
OUTPUT baskets / hour |
30 | |
UPPER WASHING ARMS |
NO | |
ELECTRICAL SUPPLY |
10 Amp 230 / 50 Hz / 1~ | |
ELECTRICAL LOADING |
||
Wash pump |
220 W / 0.3 Hp | |
Wash tank |
- | |
Rinse tank |
2.000 W | |
Total power |
2.220 W | |
TEMPERATURES |
||
Washing (°C ) |
55°C - 65°C | |
Rinsing (°C ) |
85°C - 90°C | |
Automatic detergent injection |
YES | |
Automatic rinse aid injection |
YES | |
WATER CAPACITY |
||
Wash Tank |
5.1 L | |
Rinse Tank |
1.71 L | |
Water supply pressure |
2 - 4/200 -400 | |
WATER USAGE PER CYCLE |
2.5 L | |
EXTERNAL DIMENSIONS |
||
Width |
420 mm | |
Depth |
490 mm | |
Height |
640 mm | |
Legs |
150 mm | |
Height with 150 mm legs |
790 mm | |
COMPLETE WITH |
1 open square | |
| rack for small | ||
| plates/glasses | ||
| 1 special rack | ||
| for tall glasses | ||
NET WEIGHT |
31 Kg |
SV 24 GLASSWASHER
SV 24B GLASSWASHER
SPECIFICATIONS |
SV 24 | SV 24B | |
MEAL SERVICE |
Glasswasher | Glasswasher | |
RACK DIMENSIONS |
435 x 365 or 435 x 435 mm | 435 x 365mm 435 x 435 mm | |
MAXIMUM PLATE HEIGHT |
250 mm | 250 mm | |
NO of Racks |
2 | 2 | |
FIXED CYCLE |
60 / 120 sec | 60 / 120 sec | |
MAXIMUM GLASS HEIGHT |
250 mm | 250 mm | |
DRAIN PUMP |
NO | YES | |
COLD RINSE CYCLE |
YES | YES | |
OUTPUT baskets / hour |
60 /30 | 60 /30 | |
UPPER WASHING ARMS |
YES | YES | |
ELECTRICAL SUPPLY |
15 Amp 230V50/Hz/1 | 15 Amp 230V/50/Hz/1 | |
ELECTRICAL LOADING |
|||
Wash pump |
0.25 | 0.25 | |
Wash tank |
1.5 | 1.5 | |
Rinse tank |
2.5 | 2.5 | |
Total power |
2.75 | 2.75 | |
TEMPERATURES |
|||
Washing (°C ) |
55°C - 65°C | 55?C - 65?C | |
Rinsing (°C ) |
85°C - 90°C | 85?C - 90?C | |
Automatic detergent injection |
YES | YES | |
Automatic rinse aid injection |
YES | YES | |
WATER CAPACITY |
|||
Wash Tank |
18 L | 18 L | |
Rinse Tank |
4.5 L | 4.5 L | |
Water supply pressure |
2 - 4/200 -400 | 2 - 4/200 -400 | |
WATER USAGE PER CYCLE |
3 L | 3 L | |
WATER INLET |
3/4" | 3/4" | |
NON RETURN VALVE |
YES | YES | |
DRAIN HOSE DIA ( mm ) |
30 | 30 | |
MAX HEIGHT BASE - WASTE |
250 mm | 1150 mm | |
EXTERNAL DIMENSIONS |
|||
Width |
504 mm | 504 mm | |
Depth |
550 mm | 550 mm | |
Height |
856 mm | 856 mm | |
Legs |
150 mm | 150 mm | |
Height with 150 mm legs |
856 mm | 856 mm | |
COMPLETE WITH |
435 x 365 mm | 435 x 365 mm | |
| rack | rack | ||
| 435 x 435 mm | 435 x 435 mm | ||
| Plate and | Plate and | ||
| utensil basket | utensil basket | ||
NET WEIGHT |
39 kg | 39 kg |
. These machines have been designed specification laid down in European directives 89/392/EEC AND 73/23/EEC . Please note : as a result of continuous product improvements , these specifications are subject to change without prior notice |
| INSTALLATION | Machines to be
installed by suitably qualified personnel and in accordance with
local ordinances , codes and standards, install the machines on
a self draining floor. |
| WATER SUPPLY | Connect the machine to the hot water outlet
, in coming water to be greater than 60°C and lesser
than 70°C |
| WATER PRESSURE | Being supplied to the machine is not less than
( 200 Kpa ) and no greater than 4 bar ( 400 kPa ) |
| LOW WATER PRESSURE | A booster pump is required for low water pressure
to the machine |
| HARD WATER | In hard water areas a water softener is recommended
especially for glasswashers |
| POWER | Check that the voltage of the machine coincides
with the mains voltage , electrical supply 10 Amp (SV-18H) 15
Amp (SV-24) 230/ 50 / Hz 1 ~ |
| COMMISSIONING | Enshore that the machine has been installed
as per instructions, and that the drain plugs are in place. Turn
on the water first , then then switch on the main power switch
, close the door , engage the start button on the machine , the
machine will begin to fill , the rinse tank will fill first ,
then the wash tank, these procedures may take some minutes to
complete , when the ready light comes on the machine will ready
to operate |
 |
Head Office: All initial mail correspondence to Head Office please * * * * * * * * * Regional Office Addresses: NSW QLD VIC
|