|
glasSwashers- SPECIFICATIONS - SV 24 GLASS WASHER
|
SP-24 GLASSWASHER
|
SP-24B GLASSWASHER
|
||
RACK DIMENSIONS |
435 x 365 or 435 x 435 mm | 435 x 365mm 435 x 435 mm | |
MAXIMUM PLATE HEIGHT |
250 mm | 250 mm | |
NO of Racks |
2 | 2 | |
FIXED CYCLE |
60 / 120 sec | 60 / 120 sec | |
MAXIMUM GLASS HEIGHT |
250 mm | 250 mm | |
DRAIN PUMP |
NO | YES | |
COOLING CYCLE |
YES | YES | |
OUTPUT baskets / hour |
60 /30 | 60 /30 | |
UPPER WASHING ARMS |
YES | YES | |
ELECTRICAL SUPPLY |
15 Amp 230V50/Hz/1 | 15 Amp 230V/50/Hz/1 | |
ELECTRICAL LOADING |
|||
Wash pump |
0.25 | 0.25 | |
Wash tank |
1.5 | 1.5 | |
Rinse tank |
2.5 | 2.5 | |
Total power |
2.75 | 2.75 | |
TEMPERATURES |
|||
Washing |
55°C - 65°C | 55°C - 65°C | |
Rinsing |
82°C - 90°C | 85°C - 90°C | |
Automatic detergent injection |
YES | YES | |
Automatic rinse aid injection |
YES | YES | |
WATER CAPACITY |
|||
Wash Tank |
18 L | 18 L | |
Rinse Tank |
4.5 L | 4.5 L | |
Water supply pressure |
2 - 4/200 -400 | 2 - 4/200 -400 | |
WATER USAGE PER CYCLE |
3 L | 3 L | |
WATER INLET |
3/4" | 3/4" | |
NON RETURN VALVE |
YES | YES | |
DRAIN HOSE DIA ( mm ) |
30 | 30 | |
MAX HEIGHT BASE - WASTE |
250 mm | 1150 mm | |
EXTERNAL DIMENSIONS |
|||
Width |
504 mm | 504 mm | |
Depth |
550 mm | 550 mm | |
Height |
856 mm | 856 mm | |
Legs |
150 mm | 150 mm | |
Height with 150 mm legs |
856 mm | 856 mm | |
COMPLETE WITH |
1 plate rack | 1 plate rack | |
| 1 glass rack | 1 glass rack | ||
NET WEIGHT |
39 kg | 39 kg |
. These machines have been designed in accordance with a specification laid down in European directives 89/392/EEC AND 73/23/EEC . Please note : as a result of continuous product improvements , these specifications are subject to change without prior notice |
| INSTALLATION | Machines are
to be installed by suitably qualified personnel, and in accordance
with local ordinances, codes and standards, installed on a self
draining floor. |
| WATER SUPPLY | Connect the machine to the hot water outlet,
the temperature of the in-coming water must be greater than 60°C |
| WATER PRESSURE | Not less than 2 bar ( 200 Kpa ) and no greater
than 4 bar ( 400 kPa ) |
| LOW WATER PRESSURE | A pressure booster pump is required for water
pressure less than 2 bar |
| HARD WATER | In hard water areas a water softener is recommended
especially for glasswashers |
| POWER | Check that the voltage of the machine coincides
with the mains voltage, electrical supply 15 Amp 230/ 50 / Hz 1 ~ |
| COMMISSIONING | Install the machine as per instructions, check
the drain plugs are in place. Turn on the water first, depress
the main power switch, close the door. Depress the start button,
the machine will begin to fill, the rinse tank will fill first,
then the wash tank. These procedures may take some minutes to
complete, when the ready light comes on the machine will ready
to operate |
 |
Head Office: All initial mail correspondence to Head Office please * * * * * * * * * Regional Office Addresses: NSW QLD VIC |